Installation Guide and Precautions for SUR WPC Decks

SUR WPC Decks is a high-quality, eco-friendly, and durable flooring option, but proper installation is crucial to ensure its performance and lifespan. Below are the steps and recommendations for installing SUR WPC Decks.

Here is the content list:

• Preparation

• Installation Steps

• Important Notes

Preparation:

Determine the installation area: Ensure that the ground is hard, even, and dry.

The following tools and materials are required for installing SUR WPC Decks:

1. Electric drill: Used for drilling holes and securing screws between the floor and the ground.

2. Cutting machine: Used for cutting and adjusting the size and shape of the flooring as necessary.

3. Light hammer: Used to gently tap the flooring during installation to ensure a secure connection with the ground.

4. Self-tapping screws: Used to fix the flooring to the ground.

5. Clamps: Used to maintain the flatness and stability of the flooring.

The following materials are required for installing SUR WPC Decks:

1. Flooring keel: Before installing the flooring, some keels need to be installed to ensure the 2. stability and even load distribution of the flooring.

2. Glue: Some glue may be required during the installation process to ensure the stability and tightness of the flooring.

3. Invisible screws: Maintain the beauty and safety of the flooring.

In summary, before installing SUR WPC Decks, you need to ensure that all necessary tools and materials are ready to ensure a smooth and successful installation. At the same time, it is recommended to follow the installation guide and recommendations of SUR WPC Decks to achieve the best installation effect.

Installation Steps:

1. Install the Frame: Place the frame on a firm, level surface with a gap of 300-350 millimeters. Drill a hole from the frame to the ground and fix it to the ground with a self-tapping screw. Ensure a gap of 2 millimeters between the frames.

2. Calculate the Length of the Terrace: Based on the expansion coefficient and the stretching characteristics of SUR WPC Decks, the maximum length of the terrace should be kept at around 3 meters.

3. Install the Decorative Board: Place the decorative board on the beam in a staggered or right-angle manner and fix it to the beam with clamps and screws. Ensure a gap of 5 millimeters between the decorative boards to prevent shrinkage and expansion caused by temperature differences between different weathers.

4. Cutting and Installation: If necessary, use a cutting machine to cut the decorative board into the desired length and shape. Then install it on the frame and fix it with self-tapping screws.

Important Notes

1. There are several things to note when installing SUR WPC Decks:

2. Ensure that the ground is firm, level, and dry to reduce the deformation and expansion of the floor.

3. Before installation, pre-cut the decorative boards as needed to ensure accuracy and perfection.

4. Ensure that all clamps and self-tapping screws are installed correctly and securely to prevent movement or loosening of the terrace boards.

5. Follow the manufacturer's recommendations to install SUR WPC Decks to ensure durability and aesthetics.

6. During installation, ensure consistency in the position and gap of each decorative board and regularly check if each decorative board is firmly fixed.

Overall, the installation of SUR WPC Decks requires basic tools and accessories, such as a cordless drill, cutting machine, light hammer, self-tapping screws, and clamps. During installation, ensure the frame remains level, control the gap of each decorative board, and clean the surface after installation. By following these steps, the installation of SUR WPC Decks can be smooth and maximize its performance and aesthetic effect.